prikaz prve stranice dokumenta Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom
  Download
PDF 32.26 MB
doctoral thesis
Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:013377
Bušić, Matija
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Cite this document

Bušić, M. (2015). Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom (Doctoral thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:013377

Bušić, Matija. "Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom." Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:013377

Bušić, Matija. "Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom." Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:013377

Bušić, M. (2015). 'Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom', Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 April 2024, https://urn.nsk.hr/urn:nbn:hr:235:013377

Bušić M. Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom [Doctoral thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 April 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:013377

M. Bušić, "Zavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom", Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:013377

Please login to the repository to save this object to your list.
Metadata
TitleZavarivanje trenjem aluminijskih sendvič panela rotirajućim alatom
Title (english)Friction stir welding of aluminium foam sandwich panels
AuthorMatija Bušić
MentorZoran Kožuh (mentor)
MentorDamjan Klobčar https://orcid.org/0000-0002-6130-0328 (komentor)
Committee memberZdravko Schauperl (predsjednik povjerenstva)
Committee memberZoran Kožuh (član povjerenstva)
Committee memberDamjan Klobčar https://orcid.org/0000-0002-6130-0328 (član povjerenstva)
Committee memberHrvoje Cajner (član povjerenstva)
Committee memberIvan Samardžić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-04-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Universal decimal classification
(UDC)		621 - Mechanical engineering. Nuclear technology. Machinery
669 - Metallurgy
Abstract
U doktorskom radu istraživan je utjecaja brzine zavarivanja, kuta nagiba alata i promjera čela alata na mehanička svojstva i nastanak nepravilnosti u zavarenom spoju pri zavarivanju trenjem aluminijskih sendvič-panela rotirajućim alatom. Obostranim zavarivanjem spajani su aluminijski sendvič-paneli u sučeljenom spoju s umetkom od homogenoga aluminijskoga ekstrudiranoga profila. Aluminijski sendvič-paneli debljine 12 mm kao jezgru imaju aluminijsku pjenu legure AlMg3Si6, a s gornje i donje strane na panelu su limovi aluminijeve legure EN AW-6082-T4 debljine 1 mm. Između panela u sučeljenom spoju postavljen je ekstrudirani profil aluminijeve legure EN AW-6060-T66 širine 3 mm. Pomoću takvoga umetka omogućen je manji pritisak alata na aluminijske sendvič-panele i također dostatan materijal za miješanje koji je nužan u spoju. Iteracijskim pristupom oblikovan je alat za zavarivanje te je ono provedeno alatima s istim oblikom trna, a različitim promjerima čela alata. Sila pritiska alata na materijal FN nije bila regulirani parametar, nego je samo mjerena, kako bi se iz eksperimenta izdvojili zavari dobiveni prekomjernim pritiskom alata. Iz zavarenih spojeva izrađeni su uzorci za statičko vlačno ispitivanje, trotočkasto savojno ispitivanje i analizu nepravilnosti u makrostrukturi. Dobiveni rezultati podvrgnuti su detaljnoj analizi i statističkoj obradbi koja je potvrdila predviđen utjecaj nezavisnih varijabla, te su također izrađeni matematički modeli za predviđanje navedenih mehaničkih svojstava u zavarenim spojevima aluminijskih sendvič-panela.
Abstract (english)
Within the scope of this doctorial thesis influence of welding speed, tool tilt angle and tool shoulder diameter upon the mechanical properties and formation of defects at the friction stir welding of aluminium foam sandwich panels has been investigated. Double side welding was used for producing butt welds of aluminium sandwich panels applying insertion of homogenous aluminium extruded section. Aluminium sandwich panels were 12 mm thick, having the core made of AlMg3Si6 aluminium foam. Both sides of panel were covered with the EN AW-6082-T4 sheeting, 1 mm thick. Between the panels in butt-weld configuration, AW-6060-T66 extruded section 3mm wide was inserted. Such insertion provided lower pressure of the tool upon the aluminium panels, providing also sufficient volume of the material required for the weldment formation.Applying iteration approach, welding tool has been designed and welding has been performed using same form of the probe with different shoulder diameters. Downward force of the tool FN was not a regulated parameter, it was just measured value.Samples for static tensile test, three-point bending test and macrostructural analysis of defects have been cut from the welded joints. Collected results have been thoroughly analyzed and statistically processed. Results confirmed anticipated effects of independent variables. Also, a mathematical model for prediction of analyzed mechanical properties in welded joints of aluminium panels has been established.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:013377
Study programmeTitle: Mechanical Engineering and Naval Architecture
Study programme type: university
Study level: postgraduate
Academic / professional title: doktor/doktorica znanosti, područje tehničkih znanosti (doktor/doktorica znanosti, područje tehničkih znanosti)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
RepositoryRepository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb
Created on2020-04-20 07:47:26

(©) Nacionalna i sveučilišna knjižnica u Zagrebu 2015. Sva prava pridržana. | Hrvatske bratske zajednice 4 p.p. 550, 10000 Zagreb, Hrvatska Tel. ++ 385 1 616-4040
OIB: 84838770814 | IBAN: HR66 2340 0091 1000 1008 1, Porezni broj (PDV identifikacijski broj) - VAT Number: HR84838770814
Prijava u repozitorij